Products / Home care Respiratory Therapy
Mesh Nebulizer: PY005A
Asthma Treatment : Your Best Choice PuYuan Mesh Nebulizer
More and more researches have indicated that the substance causes air pollution has triggered allergic and asthma on the infants and elders.
PuYuan vapor expert applying micron atomized technology to have medicine atomized to the fine particle for easiest absorption to entering respiratory and lung alone with the best effect of medicine treatment.
For asthma, allergic rhinitis and COPD patients, please follow doctor's instructions on atomized spray medication; For daily care, please have slain to keep respiratory healthy and prevent throat itchy and cough symptoms.
- Mist particle size MMAD 5μm
- Tiny size, virtually silent operation, portable
- Two power sources – batteries & adaptor
- Low medication residue
- Safety power cut off protection design
The Leading Brand Of Nebulzier!
Micro Mesh Technology
Liquid atomization into 5 microns of tiny particles
Backflow Barrier Design
Drug Cup reverses the valve designed to prevent drug outflow
Easy To Used
- One-touch start, Easy to operate
- Various angles can make inhalation therapy
Auto-off Design
Turn it on 20 minutes or no drug, the Nebulizer automatic power off
Quiet
The volume of the machine operation only 30 decibel
Two Kinds Of Power Supply Modes
AC adaptor and batteries, more convenience and environmental protection
The first time and after each use, please follow the cleaning and maintenance of the following methods:
- Open medical cup.
- Pour liquid medicine or saline.
- Attention to not excess the limit of medical cup ( Maximum 8 cc).
- Fasten and buckle up the medical cup cover
* Be careful not to exceed the medical cup size limit (maximum 8ml)
* Please follow the cleaning and maintenance methods after each use. - When it is in use, device can be stopped from working or to re-boot by pressing power button at any time.
| Model number | PY-005A |
|---|---|
| Power supply | 1.5v X 3, AA size alkaline battery or Ni-MH rechargeable batteries. AC power adaptor(option) Input AC 100~240V, 47/63Hz Output DC 5V, 1.6A |
| Power consumption | <2W |
| Active current consumption | <650mA |
| Standby current consumption | <0.35mA |
| Battery life | Continue operation 3 hour(min) for brand new 1.5V X3, AA alkaline battery or Ni-MH rechargeable batteries(option) |
| Battery indication | Full battery indication - Green light Weak battery - Orange light Low battery - Red light |
| Operation environment | 10~40 ℃, 30%~80% RH |
| Storage / Transportation environment | -20~70 ℃, <_85% RH |
| Flow rate | 0.2ml/min ~ 1.0ml/min (max) |
| Particle size | About 5μm (MMAD) |
| Time auto-off | Operate 20 min or no medication |
| Medication bottle volume | 8ml (Max.) |
- Opening medical cup and pouring hot water , close the medical cup cover and shake for 30 seconds.
- After pouring hot water, power on the device oprate for 1 minute.
- Discard the remaining water in the medical cup then using clean water to wash and rinse the medical cup. Repeat step 1 to 3 for three times.
- After cleaning, put the medical cup in cleaning location and let it dried naturally.
- Use clean cotton cloth and cotton swab to clean main unit.
- Use clean water to wash nozzle and mask, keeping it in a clean and safe place after wiping by a medical grade cotton
* Please do not install the wet medical cup to main body.
* Please clean medical cup thoroughly, otherwise atomizer would be clogged.
- For failure caused by human improper behaviors, it is not within the warranty coverage. (For example, the stoppage caused by non-standard cleaning process, human damage, improper usage, self-disassemble or fix the product…etc).
- Warranty card has not been sealed by distributor or has been re-written is invalid.
